HJ-6A digital temperature control multi head mixer product introduction:
Long thermostat magnetic stirrer is in the enterprise development and production of magnetic heating stirrer is based on improved and, with single point and multiple point while stirring function, simple operation, smooth running, stepless speed regulation, digital temperature control, in a wide speed range of liquid solution, precision and stability of the mixing, especially suitable for small volume samples, petroleum, chemical industry, medicine and health, environmental protection, biochemical laboratory, analysis room, education and scientific research necessary tools.
Multi head mixer performance:
1 power supply voltage: 50HZ 220V+10%
2 motor power: a single motor X6 35W
3 wire power: a single hot wire up to 200W X6
The 4 magnet speed; maximum 2400 rpm
5 mixing capacity: X6 1000ml
6, digital temperature control: room temperature -100
Multi head mixer using method:
When using the mixer, please first check whether random accessories complete, then according to the order of first loaded fixture, mix the beaker in the middle of the chrome plate, added to the solution in the beaker stir the sub solution, and then plug the instrument plugged in and connected to the power supply power on speed switch, indicator the lamp, which begin to work, speed is from low speed to high speed, high speed does not allow direct start, so as to avoid stirring is not synchronous beating. The temperature control probe to check into the socket, adjustable temperature control knob to the required temperature, does not work when the power should be cut off to ensure safety, please use the on the ground. The instrument should be kept clean and dry, no solution into the machine, to avoid mechanical damage, prevent severe concussion.
Multi head mixer attention:
1. Mixing found son beat or not stirring, please cut off the power supply check the bottom of the beaker is flat, and whether the location is. At the same time, please measure at the present voltage whether between 220 V + 10 V, otherwise there will be above.
2 the heating time should not be too long, the gap between the use of extended life.
3 speed operation can work continuously.